RHT-P10 - Temperature and humidity transmitter with remote metal probe

RHT series transmitters incorporate highly accurate, stable sensors for measuring temperature, relative humidity and dew point. Measured values are converted into 4 to 20 mA output signals linearly related to their readings. They are fully configurable via the TxConfig communication interface and Windows® software.

Model RHT-P10 is suitable for monitoring temperature and relative humidity in pressurized environments and vacuum chambers. The sensor module has a threaded metal body, suitable for mounting on a metal flange*.

• Measurement range: Configurable between 0 and 100% RH or -100 and 103 °C dew point
• Response time (1/et (63%)): 8 seconds @ 25 ºC (with air moving at 1 m/s)

• Measurement range: Configurable between -40 and 120 °C
• Response time (1/and (63%)): up to 30 s (with air moving at 1 m/s)
• Power supply: 12 Vdc to 30 Vdc
• Outputs: 4-20 mA or 20-4 mA current, 2-wire type - loop powered
• Load on outputs (RL)
• RL (max. in Ohms) = (Vcc - 12) / 0.02 Where: Vcc= Supply voltage in Volts
• Output resolution OUT1: 0.006 mA
• OUT2 output resolution: 0.022 mA
• Isolation between outputs
• Isolated 4-20 mA outputs.
• Internal protection against reverse polarity of supply voltage Protection class: Electronics module box: IP65 Sensor capsule: IP40 Cable entry: PG7 cable gland Electronics module (RHT-P10): -10 to +65 °C, 0 to 95% RH