Current loop indicator

Visit LoopView is a low-power, loop-powered, two-wire 4-20 mA current loop indicator. Its excellent accuracy enables it to indicate several variables such as pressure, differential pressure, flow, pH, temperature, acceleration and others. It features a standard EN 175301-803 (formerly DIN 43650) male and female valve connector. The LoopView is powered by its own current loop and can be inserted into sensors already installed in industrial plants with the same type of connector. The device features a 4-digit display and 2 keys, enabling you to set the value and indication range, select the decimal point position, apply the digital signal filter and adjust the calibration quickly and easily. Parameter modification is password-protected and can be carried out directly in the indicator, using the panel keys. Parameters are stored in non-volatile memory, which means they remain saved.

• Display: 4-digit red LED display
• Indication range: -1999 to 9999 or 9999 to -1999
• Configuration: Keys with tactile feedback
• Accuracy: 0.1% of span ± 1 digit
• Reading rate: 10 readings/s
• Data backup: Non-volatile EEPROM memory
• Thermal coefficient: 0.005 % / °C of span
• Advanced functions:
• Increasing or decreasing indication
• Alarm indication
• Access code configuration protection
• Electrical connection: Standard EN 175301-803 A (DIN 43650 type A)
• Power supply: Loop-powered 4 to 20 mA
• Maximum loop current: 60 mA
• Chute de tension: < 10 mA : < 5,4 V /   10 à 12 mA : < 3,9 V /  > 12 mA : < 2,8 V
• Operating conditions: -40 to 85 °C
• Dimensions: 42.5 x 52.5 x 40.7 mm
• Case: ABS (polyurethane gasket)
• Protection class: IP65, NEMA4X
• Certifications: CE, RoHS