Isolated 2-wire transmitter
Programmable temperature converter with isolated 4-20 mA sensor head
Ref. 8807000000
TxIsoPack insulated programmable temperature converter
The TxIsoPack-USB is an isolated two-wire 4-20 mA temperature converter for head mounting. Powered by the current loop, its configuration is accomplished by connecting the device directly to the PC's USB interface, requiring no additional driver installation. The output current represents the signal applied to the device input, linearized according to the configured input type.
- Type B probe head mounting 33mm center distance
- Programmable input: (with programmable scale)
- Thermocouples type J, K, T, E, N, R, S and B
- Pt100 2,3 or 4 wires
- Voltage 0 to 50 mV
- Output: 4-20 mA isolated
- Resolution: 0.004 mA (12 bits)
- Output input insulation 1000 V AC
- Linearized output for TC and Pt100
- Cold junction compensation for thermocouples
- PC configuration via USB
- Power supply: 12 to 35 Vdc
- Accuracy: maximum error 0.3% of maximum range for thermocouples; 0.2% of maximum range for Pt100 and voltage
- Temperature influence: 0.003% Scale/°C
- Environment : -20 to + 75 °C
- Probe break protection: programmable at top or bottom of scale
- Dimensions : Diam 44 mm, h 24 mm
